The built-in dehumidifier  KT-2500 has been developed to be inserted in a wall, in order to control the
percentage of relative moisture in houses and offices having a floor climatisation system.
Its post cooling battery, allows him to correctly
dehumidify the air without changing its temperature.

This battery has to be connected on the same circuit of
the cooling water of the floor, which has to be prearranged
for this purpose.
 

TECHNICAL CHARACTERISTICS  KT-2500

q   DOUBLE COVER: the caisson, which has a zinc plated net fixed outside, is inserted and walled; afterwards the machine is introduced and connected.

q   VERY THIN: only 210 mm.

q   POST COOLING CIRCUIT: the air, after passing through the condenser reaches a cooling battery and is leaded into the ambient at its same temperature.

q   LOW NOISE: thanks to an axial having a big diameter and turning at only 600 RPM, it is possible to obtain a sound pressure level of only 32 Db(A) (at 3 meters without obstacles).

q   LOW POWER CONSUMPTION: the big dimensions of the  components and the technical solutions used, allow high performances linked to low power consumption.

q   FRONT GRIT PERSONALIZABILE: it is possible to personalize the front grip even for a few pieces.

q   ECOLOGICAL COOLING GAS: the cooling gas used
is the HFC R134a.

q   HIGH PERFORMANCES: the nominal potentiality ( at 30 °C and 80 % U.R. ) is 24 l/day, which is indicatively enough for rooms up to 300 mc.

KLIMASISTEM
Bologna  -  Italy